PicoScope Stroomtangen

Stroomtangen die u om een kabel heen kunt klampen zonder de kabel te hoeven beschadigen en zonder dat u de werkende installatie moet onderbreken. Stroomtangen zijn ontworpen met bekken die open kunnen, om zo om een kabel heen te doen en als ze dicht zijn kunnen ze het magnetische veld meten en zo de stroomopname.

Stroomtangen bieden een veilige, kosten efficiente, simpele en precieze manier van stroom metingen

Onze stroomtangen werken samen met onze Pico Oscilloscopen, Pico data Logger en alle andere bekende merken van oscilloscopen en multimeters.


ta167: 200A / 2000A DC Current Probe
High performance current probe . The 2000A range is ideal for use with modern diesel and high capacity petrol engines where starter currents can exceed 600A


pp218: 60 A AC/DC Current Clamp (4mm)

 This current clamp will measure both AC and DC currents in the range 10 mA to 60 A. Features include a selectable calibrated voltage output. Supplied with 4 mm (banana) plug type connectors.



pp264: 60 A AC/DC Current Clamp (BNC)
 This improved version features superior shielding against interference and is terminated in a BNC connector allowing it to be connected directly to your PicoScope.

pp218/pp264Current Clamp Specifications
Range 10 mA to 60 A AC/DC
AC Frequency tange Up to 20kHz
Maximum conductor size 9mm
Ouput connectors 4mm bana plus (pp218), BNC-Male (pp264
Operating enviromant 0 °C to 50 °C, 70%RH

ta138: 200 A AC Current Clamp (4 mm)
Not being powered by batteries this unpowered current clamp is ideally suited to applications where current consumption is being monitored over long periods of time. Supplied with 4 mm (banana) plug type connectors.

ta138 Current Clamp Specifications
Range (1mV/A) 0.1A to 200A AC RMS
Accuracy ± 2%, ± 0.5 A
Maximum Output impedance 1kΩ
Maximum Conductor size 16mm
Operating environment 0 °C to 50 °C
Storange Environment -30 °C to 60 °C
Dimensions (W x L x D) 111 x 50 x 33 mm
Weight 129 g
Standards IEC1010-1 (1995)
EN61010-1 (2001)
Category II 600V
Category III 300V
ta011: 400 A AC Current Clamp (4 mm)
 Not being powered by batteries this unpowered current clamp is ideally suited to applications where current consumption is being monitored over long periods of time. Supplied with 4 mm (banana) plug type connectors.

ta011 Current Clamp Specifications
Range 1mV/A
10mV/A		 0.1A to 400A AC RMS
0A to 200A AC RMS
Accuracy ± 2%, ± 0.5 A
Output voltage 1mV/A
10mV/A		 1 mV AC per 1A AC
1 mV AC per 0.1A AC
Maximum Output impedance 45Ω
Maximum Conductor size 28mm
Operating environment 0 °C to 50 °C
Storange Environment -20 °C to 60 °C
Dimensions (W x L x D) 64 x 143 x 30 mm
Weight 185 g
Standards IEC1010-1 (1995)
EN61010-1 (2001)
Category II 600V
Category III 300V


pp179: 600 A AC/DC Current Clamp (4 mm)

 This current clamp can measure currents up to 600 amps for both AC (up to 400 Hz) and DC currents. Features includes a low–battery indicator. Supplied with 4 mm (banana) plug type connectors.



pp266: 600 A AC/DC Current Clamp (4 mm)

 This current clamp can measure currents up to 600 amps for both AC (up to 400 Hz) and DC currents. Features includes a low–battery indicator. Supplied with 4 mm (banana) plug type connectors.

pp179/pp266 Current Clamp Specifications
Accuracy  DC  0 to 600 A  ± (2% reading +2 A)
AC  0 to 300 A  ± (2% reading +2 A) 
AC/DC  300 to 500 A  ± (3% reading +2 A) 
AC/DC  500 to 600 A  ± (6% reading +2 A) 
AC frequency range  50 Hz to 400 Hz
Voltage Output  1mV per 1 A (0 to 600mV AC & DC)
Maximum Conductor size  30mm
Output connectors  4mm banana plugs (pp179), BNC-Male (pp266)
Operating Enviroment   0 °C to 50 °C , 70% RH