|
Specificaties ovan de PicoScope 4224 IEPE |
Listed here are the specifications
for the PicoScope 4224 IEPE. This advanced version of the
PicoScope 4224 features an
IEPE
interface making it compatible with industry-standard IEPE
accelerometers and microphones.
|
Oscilloscope — Vertical |
|
Mode |
Passive Probe Mode |
IEPE Interface Mode |
|
Bandwidth |
DC to 20 MHz
(10 MHz on ±50 mV
range) |
1.6 Hz to 20 MHz
(10 MHz on ±50
mV range) |
|
Rise time (calculated) |
17.5 ns on all ranges
except 50 mV;
35 ns on 50 mV range |
|
Output |
not applicable |
4 mA up to 24 V ±5% |
|
Input channels |
2 |
|
Vertical resolution |
12 bits |
|
Enhanced vertical resolution |
16 bits |
|
DC accuracy |
±1% of full scale |
|
Input sensitivity |
10 mV/div to 4 V/div |
|
Input characteristics |
1 MΩ in parallel with 22 pF |
1 MΩ in parallel with 1 nF |
|
Input type |
Single–ended, BNC
connector |
|
Input coupling |
Software selectable AC/DC |
AC |
|
Input ranges (full scale) |
±50 mV to ±20 V in 9
ranges |
|
Overload protection |
±100 V |
|
Oscilloscope — Horizontal |
|
Maximum sampling rate (single shot) |
80 MS/s |
Maximum sampling rate
(continuous
streaming mode) |
10 MS/s (Record length limited to 20
MS in PicoScope, unlimited when using
the supplied
SDK) |
|
Buffer memory |
32 M samples shared between active
channels |
|
Waveform buffer |
Up to 10,000 waveforms |
|
Timebase ranges |
100 ns/div to 5000 s/div |
|
Timebase accuracy |
50 ppm with ≤10 ps jitter |
|
Triggers |
|
Source |
Any input channel |
|
Basic triggers |
Auto, repeat, single, rapid, none |
|
Advanced triggers |
Rising edge, falling edge, edge with
hysteresis, pulse width, runt pulse,
dropout, windowed |
|
Maximum pre trigger delay |
10 x “per division” timebase setting |
|
Maximum post trigger delay |
50 s |
|
Spectrum Analyser |
|
Bandwidth |
20 MHz |
|
Frequency range |
DC to 20 MHz |
|
Maximum number of bins |
1,048,576 |
|
Display modes |
Magnitude, peak hold, average |
|
Window types |
Blackman, Gaussian, triangular, Hamming,
Hann, Blackman–Harris, flat–top,
rectangular |
|
PC Requirements |
|
minimum |
Processor: 1 GHz
Memory: 512 miB
Free disk space:
32–bit: 600 MB, 64–bit: 1.5 GB
Operating system: 32–
or 64–bit edition of microsoft Windows
XP (SP3), Vista, Windows 7 or Windows 8
(not Windows RT)
Ports:
USB 2.0 compliant port |
|
Recommended |
Processor: 1 GHz
Memory: 512 miB
Free disk space:
32–bit: 850 MB, 64–bit: 2 GB
Operating system: 32– or 64–bit
edition of microsoft Windows XP (SP3),
Vista, Windows 7 or Windows 8 (not
Windows RT)
Ports:
USB 2.0 or 3.0 compliant port |
|
Environmental |
Operating environment
Temperature range
Humidity |
0 °C to 45 °C (20 °C to 30 °C
for quoted accuracy)
5% to 80% RH,
non–condensing |
Storage environment
Temperature range
Humidity |
-20 to +60°C
5 to 95% RH,
non–condensing |
|
Physical Properties |
|
Dimensions |
200 x 140 x 35 mm (approx 7.9 x 5.5
x 1.4 in) |
|
Weight |
<500 g (approx 1.1 lb) |
|
Software |
|
PicoScope 6 for Windows |
PicoScope 6 is your complete test and
measurement lab in one application.
Features include:
Capture
modes: oscilloscope, spectrum
and persistence.
Channel maths: calculate
the sum, difference, product, inverse or
create your own custom function using
standard arithmetic, exponential and
trigonometric functions.
Mask limiting testing:
pass/fail, failure count, total count.
serial Decoding: decode
data from a serial bus such as I²C.
Automated measurements
Scope mode: AC
RMS,
true RMS, cycle time, DC average, duty
cycle, falling rate, fall time,
frequency, high pulse width, low pulse
width, maximum, minimum, peak–to–peak,
rise time and rising rate.
Spectrum mode: frequency at
peak, amplitude at peak, average
amplitude at peak, total power, total
harmonic distortion (THD % and THD dB),
total harmonic distortion plus noise
(THD+N), spurious-free dynamic range
(SFDR), signal+noise+distortion to
signal+noise ratio (SINAD), signal to
noise ratio (SNR) and intermodulation
distortion (IMD).
Export data
formats: comma separated values
(CSV), tab delimited (TXT), windows
bitmap (BMP), graphics interchange
format (GIF), portable network graphics
(PNG),
MATLAB 4 format (MAT).
Full details for PicoScope 6 |
|
Software development kit |
Includes drivers and example code for
various programming languages including
C, Excel, LabVIEW and Visual Basic.
Download SDK |
|
Language Support |
Software
PicoScope
6 |
Full support for:
English, Français, Deutsch, Italiano,
Español
Menus and dialogs
only for: 中文 (简体), 中文 (繁體),
Čeština, Dansk, suomi, Ελληνικά, Magyar,
한국어, 日本語, Norsk, Polski, Português,
română, Русский, Svenska, Türkçe |
Documentation
User’s guide
Programmer’s guide
|
English, Français, Deutsch,
Italiano, Español, 中文
English |
|
General |
|
Data sheet |
English,
中文 (简体),
Deutsch,
Español,
Français,
Italiano |
|
Additional hardware (supplied) |
USB 2.0 cable, user manuals,
software CD–ROM |
|
PC interface |
USB 2.0 (USB 1.1 compatible) |
|
Power requirements |
Powered from USB port |
|
Compliance |
European EMC and LVD standards
FCC Rules Part 15 Class A
RoHS compliant |
|
Total Satisfaction Guarantee |
In the event that this product does not
fully meet your requirements you can
return it for an exchange or refund. To
claim, the product must be returned in
good condition within 14 days. |
|
Warranty |
5 years |
|
|
